Jeu 40 pièces embouts Torx et hexagonaux 1/2'' 3/8'' voiture

El maletí fa 32 cm x 17 cm x 3 cm i el pes total, incloent-hi les broques i adaptadors, és de 2,2 kg. El kit ofereix broques de 30 mm i 75 mm de longitud en totes les mides llistades: hexagonals de 4, 5, 6, 7, 8, 10 i 12 mm; ranurades de 5, 6, 8, 10 i 12 mm; i Torx en T20, T25, T30, T40, T45, T50 i T55. Tots els bits tenen tija de 10 mm que encaixa als adaptadors de 1/2'' i 3/8''.

Aquest set és compatible amb claus de tipus carraca (encaix 1/2'' i 3/8''), trepants i claus de tub mitjançant els adaptadors inclosos. Està dissenyat per a ús manual o amb eines que no superin la torsió nominal de 50-60 Nm per a broques de 30 mm i fins a 80 Nm per a les de 75 mm. L’ús en eines d’impacte està desaconsellat, ja que podria reduir la vida útil o danyar la tija.

Es recomana netejar les broques després de fer-les servir i guardar-les seques al maletí original. Com que són d’acer crom vanadi (Cr-V), ofereixen bona resistència a l’òxid, però afegir un lubricant lleuger de tant en tant maximitza la protecció. No es recomana fer-les servir amb cargols danyats per evitar deformació ni sotmetre-les a cops d’impacte directes.

El producte, per la seva tipologia, no requereix certificació obligatòria, però l’acer Cr-V sovint s’aplica d’acord amb normes EN/ISO 10665-1 per a eines manuals. La reposició depèn del fabricant, però molts proveïdors ofereixen garantia limitada (defectes de fabricació) i possibilitat d’adquirir broques soltes compatibles. Es recomana consultar-ho amb el distribuïdor postvenda per assegurar-ho.

The case measures 32 cm x 17 cm x 3 cm and the total weight, including the bits and adapters, is 2.2 kg. The kit includes 30 mm and 75 mm bits in all the listed sizes: hex bits of 4, 5, 6, 7, 8, 10 and 12 mm; slotted bits of 5, 6, 8, 10 and 12 mm; and Torx bits T20, T25, T30, T40, T45, T50 and T55. All bits have a 10 mm shank that fits the 1/2'' and 3/8'' adapters.

This set is compatible with ratchet wrenches (1/2'' and 3/8'' drive), drills and socket wrenches using the included adapters. It is designed for manual use or with tools that do not exceed the nominal torque of 50–60 Nm for 30 mm bits and up to 80 Nm for 75 mm bits. Use with impact tools is not recommended as it could reduce service life or damage the shank.

It is recommended to clean the bits after use and store them dry in the original case. As they are made from chrome vanadium steel (Cr-V), they offer good resistance to rust, but adding a light lubricant from time to time maximises protection. They are not recommended for use with damaged screws to avoid deformation, nor should they be subjected to direct impact blows.

By its nature, the product does not require compulsory certification, but Cr-V steel is often used in accordance with EN/ISO 10665-1 standards for hand tools. Replacement depends on the manufacturer, but many suppliers offer a limited warranty (manufacturing defects) and the option to buy compatible individual bits. It is advisable to check with the after-sales distributor to confirm this.

The case measures 32 cm x 17 cm x 3 cm and the total weight, including the bits and adaptors, is 2.2 kg. The kit includes 30 mm and 75 mm bits in all the listed sizes: hex bits of 4, 5, 6, 7, 8, 10 and 12 mm; slotted bits of 5, 6, 8, 10 and 12 mm; and Torx bits T20, T25, T30, T40, T45, T50 and T55. All bits have a 10 mm shank that fits the 1/2'' and 3/8'' adaptors.

This set is compatible with ratchet wrenches (1/2'' and 3/8'' drive), drills and socket wrenches via the included adaptors. It is designed for manual use or with tools that do not exceed the nominal torque of 50-60 Nm for 30 mm bits and up to 80 Nm for 75 mm bits. Use with impact tools is not recommended as it could reduce service life or damage the shank.