Batterie iPhone 3GS - Remplacement original Satkit pour réparation
Marque : satkit
TVA incluse (HT : 2,38€)
La batterie iPhone 3GS de Satkit est un composant essentiel pour ceux qui souhaitent effectuer un remplacement sur leur appareil mobile Apple iPhone 3GS. Ce produit est conçu pour les utilisateurs qui veulent réparer leur téléphone eux-mêmes, en sachant que l’installation peut être complexe et nécessite une extrême prudence.
Caractéristiques principales :
- Compatible exclusivement avec iPhone 3GS.
- Produit original Satkit pour réparation.
- Inclut uniquement la batterie comme indiqué sur l’image du produit.
- Sans garantie, retours ni échanges.
- Aucune assistance technique n’est fournie pour l’installation.
Utilisation recommandée : Cette batterie est idéale pour les utilisateurs expérimentés en réparation d’appareils mobiles qui souhaitent remplacer la batterie de leur iPhone 3GS. En raison de la délicatesse des composants et de la difficulté d’installation, il est recommandé de procéder uniquement si vous disposez des compétences nécessaires.
Conditions importantes :
- La réparation est effectuée sous votre propre responsabilité.
- Aucune réclamation n’est acceptée pour les dommages causés pendant l’installation.
- Le produit est actuellement épuisé et non disponible pour expédition immédiate.
- Il est recommandé de vérifier la disponibilité future avant d’effectuer l’achat.
Compatibilité : Exclusivement pour iPhone 3GS, non compatible avec les autres modèles d’iPhone.
Si vous n’êtes pas d’accord avec ces conditions, veuillez ne pas effectuer l’achat. Le produit inclut uniquement ce qui est montré sur la photographie officielle.
- Compatible exclusivement avec iPhone 3GS
- Produit original Satkit pour réparation
- Sans garantie, retours ni échanges
- Installation délicate et sans assistance technique
- Produit actuellement épuisé, vérifiez la disponibilité
Questions & Réponses des clients
Quines són les especificacions tècniques i dimensions de la bateria per a iPhone 3GS?
La bateria per a iPhone 3GS és de polímer de liti (Li-Po) amb una capacitat nominal aproximada de 1220 mAh, 3.7 V, potència 4.5 Wh. Les seves dimensions són d'aproximadament 60 mm x 33 mm x 3 mm. Pes estimat: 20 g. Aquestes xifres poden variar lleugerament segons el lot o el fabricant.
Quines eines es requereixen i quin risc implica la instal·lació?
Es recomana utilitzar tornavisos de precisió tipus Phillips, una eina plàstica d'obertura i pinces antiestàtiques. L'operació comporta risc de danyar la placa o el connector si es força, a més de la possibilitat de punxada o curtcircuit accidental de la bateria. És fonamental fer la manipulació en un entorn lliure d'estàtica i amb molta precaució.
Quina és la vida útil mitjana d'aquesta bateria i quins factors la poden reduir?
Les bateries de polímer de liti per a iPhone 3GS solen tenir una vida útil d'entre 300 i 500 cicles de càrrega complets, en condicions òptimes (temperatura ambient 20–25°C, càrrega entre el 20% i el 80%). Factors com temperatures extremes, càrregues freqüents o descarregar-les completament poden reduir-ne significativament la durada.
What are the technical specifications and dimensions of the battery for iPhone 3GS?
The battery for iPhone 3GS is a lithium polymer (Li-Po) battery with an approximate nominal capacity of 1220 mAh, 3.7 V, and 4.5 Wh. Its dimensions are approximately 60 mm x 33 mm x 3 mm. Estimated weight: 20 g. These figures may vary slightly depending on the batch or manufacturer.
What tools are required and what risks does installation involve?
It is recommended to use Phillips precision screwdrivers, a plastic opening tool and anti-static tweezers. The operation carries a risk of damaging the board or connector if forced, as well as the possibility of puncturing or accidentally short-circuiting the battery. It is essential to work in an anti-static environment and with great care.
What is the average lifespan of this battery, and what factors can reduce it?
Lithium polymer batteries for iPhone 3GS typically have a lifespan of between 300 and 500 full charge cycles under optimal conditions (ambient temperature 20–25°C, charge between 20% and 80%). Factors such as extreme temperatures, frequent charging or fully discharging the battery can significantly reduce its lifespan.
What are the technical specifications and dimensions of the battery for iPhone 3GS?
The battery for iPhone 3GS is a lithium polymer (Li-Po) battery with an approximate nominal capacity of 1220 mAh, 3.7 V, and 4.5 Wh. Its dimensions are approximately 60 mm x 33 mm x 3 mm. Estimated weight: 20 g. These figures may vary slightly depending on the batch or manufacturer.
What tools are required, and what risks does installation involve?
It is recommended to use Phillips precision screwdrivers, a plastic opening tool and anti-static tweezers. The operation carries a risk of damaging the board or connector if forced, as well as the possibility of puncturing or accidentally short-circuiting the battery. It is essential to handle it in an ESD-safe environment and with great care.
What is the average lifespan of this battery, and what factors can reduce it?
Lithium polymer batteries for iPhone 3GS typically have a lifespan of between 300 and 500 full charge cycles under optimal conditions (ambient temperature 20–25°C, charging between 20% and 80%). Factors such as extreme temperatures, frequent charging or fully discharging the battery can significantly reduce its lifespan.
Vilka tekniska specifikationer och mått har batteriet för iPhone 3GS?
Batteriet för iPhone 3GS är ett litium-polymerbatteri (Li-Po) med en nominell kapacitet på cirka 1220 mAh, 3,7 V, effekt 4,5 Wh. Måtten är cirka 60 mm x 33 mm x 3 mm. Uppskattad vikt: 20 g. Dessa uppgifter kan variera något beroende på batch eller tillverkare.